#9 - Woolrich Company- Katie Rozeboom

Woolrich Company

The process of transforming raw wool into finished fabric involves several key steps. It begins with shearing, where wool is collected from sheep. This raw wool, often filled with natural oils like lanolin and impurities, is then scoured -- washed thoroughly to remove dirt, grease, and other contaminants. Next, the clean wool undergoes a process called carding, where the fibers are disentangled and aligned. This creates long strands, also known as rovings, which are ready for spinning. In the spinning stage, the rovings are twisted to create yarns of varying thicknesses. The yarn can then be dyed or left natural, depending on the desired outcome. Once the yarn is ready, it can either be woven or knitted into fabric. In weaving, yarns are interlaced in a perpendicular pattern to form a textile, while in knitting, the yarn is looped to create the fabric. After the fabric is created, it goes through finishing processes like fulling, where the fabric is shrunk slightly to tighten the weave, and may also be brushed or pressed to achieve the desired texture. Quality control checks are done at the end to ensure the fabric meets the necessary standards before being prepared for market.

Comments

  1. Lena Fehrenbach October 21, 2024 at 12:03 PM

    Great explanation of the wool-to-fabric process! You broke down each step clearly, from shearing to finishing, giving a comprehensive overview of how raw wool transforms into high-quality textiles.

    ReplyDelete

Post a Comment

Popular posts from this blog

#1- Katie Rozeboom

  Katie Rozeboom Introduction         Hello! My name is Katie Rozeboom, and I am from Schoolcraft, MI. I chose Interior Design as my major because I've always loved being creative, arranging things, and picking out colors that go together. I am interested specifically in Residential design. I have taken online courses before. I can be successful in this class if the assignments are clearly laid out and very specific about what is required. Current LEED Initiatives         The most current LEED version is LEED v5. According to the USGBC, this version's rating system and approach have significantly changed. This shift has been the largest structural reorganization of the system since v2009. Its main goal is to align the LEED rating system with current industry practices and to address today's climate crisis. The guiding principles of LEED v5 are as follows: Decarbonization: "Decarbonize the building industry swiftly to refle...
Read more

Week 14: Research Initiatives

Image
Research Initiatives: Week 14 INT 323 Eva Serrato Carpet Tile Installation: For carpet tile installation you first have to make sure that the sub floor is in the correct condition and any sort of padding is installed beforehand. There are different patterns that need to be decided before installation starts. After this is decided then how the tiles will be planned when they intersect a doorway or a corner and this can be decided by a dry lay which is laying the carpets down before they are glued. Then the tiles need to acclimate to the humidity of the room. Then the adhesive is placed, either a peel and stick or a direct glue down. Usually starting in the middle of the room to the outside would be most efficient.  Carpet tiles can show more seams; however the installation can be easier as well as the repair can be cheaper that wall to wall because the individual tile can be removed. Wall to Wall Installation: For wall-to-wall carpet installation it is important that the subfloor is...
Read more

#1 Personal Blog/ Special Considerations- Eva Serrato

  Personal Blog/ Special Considerations INT 323   Eva Serrato   My name is Eva Serrato and I am Senior at Judson University. I am on the women's Cross county and Track team. My hometown is Gilberts IL, which is 15 minutes away from Judson. The reason why I picked interior design is because, growing up I always liked art and design because my mom was an art teacher, I was exposed to design and creating art at a young age. Over the years I wanted to pursue a career that would make me money, but also have a design aspect as well. I chose interior design because I love the design and problem-solving part of the job, I love the balance of creating and problem solving while also having fun designing and talking to clients.           My area of interest would be residential work, however, over the past couple years I have been leaning more towards commercial, specifically hospitality work. I feel that there are many interesting parts to designi...
Read more